院报 ›› 2020, Vol. 37 ›› Issue (2): 100-105.DOI: 10.11988/ckyyb.20181056

• 岩土工程 • 上一篇    下一篇

微型桩抗弯承载力试验研究

陈再谦1, 帅世杰1, 蒲黍絛1, 张丽华1, 饶军应2, 刘灯凯2, 谢财进2   

  1. 1.中国电建集团贵阳勘测设计研究院有限公司,贵阳 550081;
    2.贵州大学 土木工程学院,贵阳 550025
  • 收稿日期:2018-09-30 出版日期:2020-02-01 发布日期:2020-04-09
  • 通讯作者: 饶军应(1983-),男,江西南丰人,副教授,博士,从事岩土及隧道工程方面的教学与科研工作。E-mail:rao-ale@163.com
  • 作者简介:陈再谦(1981-),男,贵州凯里人,高级工程师,硕士,主要从事岩土工程方面的研究工作。E-mail:48300187@qq.com
  • 基金资助:
    国家自然科学基金项目(51968010,51608141)

Experimental Study on Flexural Bearing Capacity of Micropiles

CHEN Zai-qian1, SHUAI Shi-jie1, PU Shu-tao1, ZHANG Li-hua1, RAO Jun-ying2, LIU Deng-kai2, XIE Cai-jin2   

  1. 1.Power China Guiyang Engineering Co., Ltd., Guiyang 550081, China;
    2.College of Civil Engineering, Guizhou University, Guiyang 550025, China
  • Received:2018-09-30 Online:2020-02-01 Published:2020-04-09

摘要: 对于存在安全隐患且急需抢险处治的的滑坡、路堤边坡、基坑等救灾工程,坡体稳定性差,传统支挡结构难以实现快速施作,而微型桩具有明显优越性。但不同形式的微型桩,其承载力及破坏特征不同。通过改进yas-2000型压力试验机,并将其用于测试钢筋混凝土桩、钢管混凝土配钢筋桩及钢管混凝土配工字钢桩的抗弯承载力,结果表明:①钢筋混凝土桩的受力全过程可分为3个阶段,即未裂阶段、裂缝阶段及破坏阶段;②钢管混凝土配钢筋桩及钢管混凝土配工字钢桩的受力过程可分为4个阶段,即压实阶段、弹性阶段、弹塑性阶段和强化阶段;③通过对比分析上述3种不同结构微型桩的荷载-位移曲线得出在3种不同结构的微型桩中,直径相同时钢管混凝土配工字钢桩的抗弯承载力最大,其极限弯矩值为209.21 kN·m。

关键词: 微型桩, 抗弯承载力, 钢筋混凝土桩, 钢管混凝土配钢筋桩, 钢管混凝土配工字钢桩

Abstract: Micropile is superior to conventional retaining structures in the emergency treatment of landslide, embankment slope, or foundation pit with poor stability. Since the bearing capacity and failure characteristics of different micropiles vary, we improved the yas-2000 compression testing machine and applied it to measuring the flexural bearing capacity of three different micropiles: reinforced concrete pile, steel pipe concrete filled rebar pile, and steel pipe concrete filled I-beam pile. Results unveiled that the whole process of force acting on reinforced concrete pile can be divided according to three phases, namely, uncracked phase, cracked phase, and destruction phase. The stress process of steel pipe concrete filled rebar pile, and steel pipe concrete filled I-beam pile can be divided into four phases, compaction phase, elastic phase, elasto-plastic phase, and reinforcement phase. In addition, comparison of the load-displacement curves of these three micropiles revealed that given the same diameter, steel pipe concrete filled I-beam pile has the largest flexural bearing capacity with the ultimate bending moment reaching 209.21 kN·m.

Key words: micropiles, flexural capacity, reinforced concrete pile, steel pipe concrete filled rebar pile, steel pipe concrete filled I-beam piles

中图分类号: 

Baidu
map