院报 ›› 2019, Vol. 36 ›› Issue (11): 62-68.DOI: 10.11988/ckyyb.20190140

• 岩土工程 • 上一篇    下一篇

基于现场试验数据分段的岩基抗剪强度参数概率统计分析方法

赖国伟1, 周伟1, 李佳男2, 徐建强3   

  1. 1.武汉大学 水资源与水电工程科学国家重点实验室,武汉 430072;
    2.中国建筑第七工程局有限公司,郑州 450000;
    3.中国电建集团华东勘测设计研究院有限公司,杭州 310000
  • 收稿日期:2019-02-13 出版日期:2019-11-01 发布日期:2019-11-11
  • 作者简介:赖国伟(1962-),男,江西赣州人,教授,博士,主要从事水工结构工程方面的教学和科研工作。E-mail:1109641210@qq.com
  • 基金资助:
    国家重点研发计划项目(2018YFC1508503)

A Statistical Method for Shear Strength Parameters of Rock Foundations Based on Field Test Data Fragments

LAI Guo-wei1, ZHOU Wei1, LI Jia-nan2, XU Jian-qiang3   

  1. 1.State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072, China;
    2.China Construction Seventh Engineering Division Corp., Ltd., Zhengzhou 450000, China;
    3.Power China Huadong Engineering Corporation Limited, Hangzhou 310000, China
  • Received:2019-02-13 Online:2019-11-01 Published:2019-11-11

摘要: 依据精度相近亦即试块数相近原则对现场抗剪试验数据适当分段,基于数理统计理论,首先推导并提出了由现场抗剪试块正应力和剪应力直接计算岩基摩擦系数与凝聚力统计参数的新公式;然后根据岩基抗剪试验特点,结合概率论随机模拟方法与线性代数正交变换理论,提出了一种验证试块法的计算机随机模拟测评方法。该方法也可应用于其他考虑了试块抗剪强度离散性的摩擦系数与凝聚力概率统计方法的验证。通过应用该计算机随机模拟测评方法,对有关试块法进行了验证分析,论证了提出的新公式的正确性,探讨了本文试块法所需的最少试块数量。最后还进行了一系列具体工程抗剪强度参数的统计计算分析,给出了摩擦系数与凝聚力的若干统计特点。

关键词: 岩基, 抗剪强度参数, 概率统计分析, 试块法, 随机模拟测评方法, 试验数据分段

Abstract: According to experimental data fragments by the principle of close precision, namely, close number of test blocks, and based on mathematical statistics theory, we derived formulas for calculating the statistical parameters of the frictional coefficient and cohesion of rock foundations directly from the normal stress and shear stress on the shear plane of each block in the in-situ shear test. The method takes into consideration the correlation between frictional coefficient and cohesion. In subsequence, in line with the random simulation method of probability theory and the orthogonal transformation theory of linear algebra, we proposed a computational random simulation evaluation method for verifying test block methods according to the characteristics of shear test. The method can also be applied to the verification of other probability statistical methods of frictional coefficient and cohesion considering the discretization of shear strength of test blocks. By applying the computational random simulation method, we evaluated some test block methods and verified the validity of the proposed formulas. We also discussed the total number of minimum test blocks for the test block method. Finally, shear strength parameters of some engineering examples are analyzed statistically, and some statistical characteristics of friction coefficient and cohesion are given.

Key words: foundation rock, shear strength parameters, statistical analysis of probability, test block method, random simulation evaluation method, test data fragments

中图分类号: 

Baidu
map