院报 ›› 2013, Vol. 30 ›› Issue (12): 112-117.DOI: 10.3969/j.issn.1001-5485.2013.12.021

• 水工结构与材料 • 上一篇    下一篇

重力坝深层抗滑稳定分析中扬压力施加方法

黄耀英1,沈振中2,郑宏3a,3b   

  1. 1.三峡大学水利与环境学院,湖北宜昌443002;
    2.河海大学水利水电学院,南京210024;
    3.中国科学院a.武汉岩土力学研究所;b.岩土力学与工程国家重点实验室,武汉430071
  • 收稿日期:2012-11-13 修回日期:2013-12-10 出版日期:2013-12-10 发布日期:2013-12-10
  • 作者简介:黄耀英(1977-),男,湖南郴州人,副教授,博士,主要从事大坝安全监控及数值计算,(电话)13997662901(电子信箱)huangyaoying@sohu.com。
  • 基金资助:
    国家自然科学基金项目(51209124);湖北省教育厅科学技术项目(D20101207)

Method of Applying Uplift Pressure in the Analysis of DeepSliding Stability of Gravity dam

HUANG Yao-ying1,SHEN Zhen-zhong2,ZHENG Hong3   

  1. 1.College of Hydraulic Environmental Engineering,China Three Gorges University,Yichang 443002,China;
    2.College of Water Conservancy and Hydropower Engineering,Hohai University,Nanjing 210024,China;
    3.State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences,Wuhan 430071,China
  • Received:2012-11-13 Revised:2013-12-10 Online:2013-12-10 Published:2013-12-10

摘要: 针对采用有限单元法对扬压力进行计算时,常容易发生疑惑而导致错误的问题,首先对比分析了双斜面深层抗滑稳定分析时2种不同扬压力的作用方式,然后研究了采用有限元法分析重力坝沿坝基面或深层双斜面抗滑稳定时扬压力的施加方式。分析认为:扬压力作为面荷载作用在滑面上,或作为体荷载作用在滑块上,虽然总的作用力近似相等,但由于滑块为变形体,不一定引起相近的效应量(位移和应力等);其中,在垂直方向分别按面荷载或体荷载作用引起的差异,相对于在水平方向分别按面荷载或体荷载作用引起的差异来说,前者引起的差异较后者引起的差异大一些。

关键词: 扬压力, 重力坝, 有限元法, 坝基面, 双斜面

Abstract: Finite element method often brings about errors in the calculation of uplift pressure. In view of this,two action modes of uplift pressure in the analysis of the deep sliding stability of double inclined planes were compared and analyzed. Then the methods of applying uplift pressure when analyzing the sliding stability of double inclined planes and gravity dam’s foundation planes using finite element method were researched. It’s found that uplift pressure,as surface load acting on the slip surface or as body load acting on the sliding block,though with approximately equal total force,doesn’t necessarily cause similar effect quantity (displacement and stress,etc) because sliding block is the deformation body. The difference caused by applying surface load or body load in the vertical direction is larger than that in the horizontal direction.

Key words: uplift pressure, gravity dam, FEM, dam foundation surface, double inclined planes

中图分类号: 

Baidu
map