院报 ›› 2022, Vol. 39 ›› Issue (7): 78-86.DOI: 10.11988/ckyyb.20210166

• 岩土工程 • 上一篇    下一篇

膨胀土中EPS缓冲层-悬臂式挡墙支护结构的受力变形数值模拟

王协群1, 匡文壮1, 韩仲2, 邹维列2   

  1. 1.武汉理工大学 土木工程与建筑学院,武汉 430070;
    2.武汉大学 土木建筑工程学院,武汉 430072
  • 收稿日期:2021-02-27 修回日期:2021-04-25 出版日期:2022-07-01 发布日期:2022-07-25
  • 通讯作者: 韩 仲(1986-),男,河南开封人,副教授,博士,研究方向为非饱和土、土工合成材料。E-mail: zhong.han@whu.edu.cn
  • 作者简介:王协群(1971-),女,江苏扬州人,教授,博士,研究方向为地基处理、土工合成材料。E-mail: xqscwang@126.com
  • 基金资助:
    国家重点研发计划项目(2019YFC1509803);国家自然科学基金项目(51979206,51809199)

Numerical Simulation of the Force and Deformation Characteristics of Cantilever Retaining Structure with EPS Buffer in Expansive Soil

WANG Xie-qun1, KUANG Wen-zhuang1, HAN Zhong2, ZOU Wei-lie2   

  1. 1. School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China;
    2. School of Civil Engineering, Wuhan University, Wuhan 430072, China
  • Received:2021-02-27 Revised:2021-04-25 Online:2022-07-01 Published:2022-07-25

摘要: 针对膨胀土中墙后铺设聚苯乙烯泡沫(EPS)缓冲层的悬臂式挡墙,探究了膨胀土因降雨入渗产生膨胀时EPS缓冲层的减压效果。对南阳中膨胀土开展膨胀特性试验,确定其在侧限和竖向荷载作用下的膨胀系数;在此基础上,利用ABAQUS数值软件对膨胀土-EPS缓冲层-悬臂式挡墙体系开展数值分析,研究了EPS缓冲层的厚度与弹性模量及与墙体和膨胀土间摩擦对该支护结构受力变形特征的影响规律。结果表明:EPS缓冲层能有效减小悬臂式挡墙上的侧压力并改变墙背土压力的分布;厚度较厚、弹性模量较低的EPS缓冲层减载效果更好;EPS缓冲层与墙体、膨胀土之间的摩擦影响墙背侧压力的分布,但不影响侧压力的合力大小;EPS缓冲层的压缩刚度与其减载性能成反比。

关键词: 膨胀土, 聚苯乙烯泡沫(EPS), 悬臂式挡墙, 数值模拟, 土压力

Abstract: The decompression effect of expanded polystyrene (EPS) buffer layer in cantilever retaining wall was examined when the expansive soil expands due to rainfall infiltration. The expansion characteristics of Nanyang expansive soil were tested to determine its expansion coefficient under lateral and vertical loads. On this basis, the expansive soil-EPS buffer layer-cantilever retaining wall system was numerically simulated using ABAQUS to explore the influences of EPS buffer layer (thickness, elastic modulus, and interface friction) on the stress and deformation of the system. Numerical results indicate that EPS buffer layer effectively reduces the lateral pressure on the cantilever retaining wall and changes the distribution of soil pressure on the wall back. The EPS buffer layer with larger thickness and lower elastic modulus has better effect. The friction between EPS buffer layer, wall and expansive soil affects the distribution of lateral pressure on the wall, but does not affect the resultant force of the lateral pressure. In addition, the compression stiffness of EPS buffer layer is inversely proportional to its load reduction performance.

Key words: expansive soil, Expanded Polystyrene (EPS), flexible cantilever retaining wall, numerical simulation, earth pressure

中图分类号: 

Baidu
map