院报 ›› 2020, Vol. 37 ›› Issue (5): 145-150.DOI: 10.11988/ckyyb.20190032

• 岩土工程 • 上一篇    下一篇

土工织物加筋尾矿砂界面力学特性试验研究

张利阳1, 易富1, 李俊元2, 侯朋3, 金洪松3, 于犇3, 孟兴涛3   

  1. 1.辽宁工程技术大学 建筑与交通学院,辽宁 阜新 123000;
    2.阜新市自然资源事务服务中心,辽宁 阜新 123000;
    3.辽宁工程技术大学 土木工程学院,辽宁 阜新 123000
  • 收稿日期:2019-01-10 出版日期:2020-05-01 发布日期:2020-06-10
  • 通讯作者: 易 富(1978-),男,河北张北人,教授,博士,博士生导师,主要从事环境岩土工程及道路工程方向的研究。E-mail:yifu9716@163.com
  • 作者简介:张利阳(1994-),男,内蒙古呼伦贝尔人,硕士,主要从事土工织物加筋尾矿坝方面的研究。E-mail:1411844989@qq.com
  • 基金资助:
    国家自然科学基金项目(51774163):辽宁省教育厅科研基金项目(LJYL054):鞍钢科研项目(2018-科A19)

Experimental Study on Interfacial Mechanical Properties ofGeotextile-reinforced Tailings Sand

ZHANG Li-yang1, YI Fu1, LI Jun-yuan2, HOU Peng3, JIN Hong-song3, YU Ben3, MENG Xing-tao3   

  1. 1. School of Architecture and Transportation, Liaoning Technical University, Fuxin 123000, China;
    2. Fuxin Municipal Service Center of Natural Resources Affairs, Fuxin 123000, China;
    3. School of Civil Engineering, Liaoning Technical University, Fuxin 123000, China
  • Received:2019-01-10 Online:2020-05-01 Published:2020-06-10

摘要: 为研究土工织物加筋尾矿砂界面力学特性,在不同的尾矿砂含水率、试验拉拔速率和竖向压强下开展一系列土工布及土工格栅的拉拔试验。比较相同条件下的土工格栅与土工布拉拔试验结果可知:土工布对细粒尾矿砂的加筋效果优于土工格栅的加筋效果,竖向压强较大时两者的拉拔力峰值差值增大;随尾矿砂含水率增加,界面剪应力峰值明显减小,界面剪应力峰值在含水率1.2%时比含水率8.4%时增加50%以上,表观黏聚力先增加后减小,在最优含水率附近时达到最大,界面摩擦角先快速减小后缓慢减小;随试验拉拔速率增加,界面剪应力峰值缓慢增加,表观黏聚力先增加后减小,界面摩擦角先减小后增加;各工况下剪应力峰值均随竖向压强的增大而增大。研究结果可为土工织物加筋尾矿坝工程设计提供参考。

关键词: 土工布, 土工格栅, 拉拔试验, 加筋特性, 尾矿砂含水率

Abstract: In order to study the mechanical properties of the reinforced interface between geotextile and fine tailings sand, we carried out pull-out tests on geogrid and geotextile under different test pull-out rates and different vertical pressures with varying moisture content of tailings sand. By comparing the pull-out test results of geogrid and geotextile under the same conditions, we conclude that geotextile has stronger reinforcement effect on fine tailings sand, and when vertical pressure is higher, the difference between the reinforcement effect on geotextile and geogrid is larger. With the rising of moisture content of tailings sand, the peak value of interfacial shear stress drops obviously: the interfacial shear stress at a moisture content of 1.2% is 1.5 times that when moisture content is 8.4%. Apparent cohesion increases at first but then decreases, with the peak value appearing near the optimal moisture content, whereas interfacial friction angle reduces rapidly at first and then declines slowly afterwards. With the augment of pull-out rate, the peak value of interfacial shear stress climbs slowly, and the apparent cohesion increases at first and then decreases, while the interfacial friction angle decreases at first and then increases. Under all working conditions, the peak value of shear stress increases linearly with the rising of vertical pressure.

Key words: geotextile, geogrid, pull-out test, reinforcement properties, moisture content of tailings sand

中图分类号: 

Baidu
map