%0 Journal Article
%A ZHOU Wei
%A GAO Hui-cai
%A WU Teng
%T Application of 2-D Numerical Model  of Bed Load in  Rivers of  Mountain Area:Regulation Project in Wangmo River as An Example
%D 2016
%R 10.11988/ckyyb.20150473
%J Journal of Yangtze River Scientific Research Institute
%P 6-17
%V 33
%N 8
%X In order to utilize rich hydropower resources in southwest mountain area of China and decrease flow with high sand proportion and debris flow disasters caused by flash flood, we should establish suitable two-dimensional bed load mathematical models for rivers in mountain area. On the basis of finite volumetric method, we dispersed common controlling equations in sediment numerical model of two-dimensional flow, dealt  with dry land boundary by using frozen method, and established  a general two-dimensional bed load mathematical model. Xintun section in Wangmo river  located in Guizhou province  was taken as an example. We carried  out numerical calculation of flow field, exploring scouring and deposition of bed load. Test results showed that, as for water level calculation and verification of scouring and deposition in the river bed, simulated data was in consistent with data from empirical formula; after regulation project of the river, most of water levels along the flow direction decreased, except for slight increase in few sections; meanwhile, in the condition of given discharge,water level after the regulation was smaller  than that before the regulation, and sediment deposition into the water flume decreased, which  is in favor of river flood control.
%U http://ckyyb.crsri.cn/EN/10.11988/ckyyb.20150473