河工模型断面垂线流速自动测量系统的研制

胡向阳; 马 辉; 许 明; 张文二

doi:10.11988/ckyyb.20150548

PDF(1382 KB)

raybet体育在线院报 ›› 2015, Vol. 32 ›› Issue (12) : 139-143. DOI: 10.11988/ckyyb.20150548

仪器设备与测试技术

河工模型断面垂线流速自动测量系统的研制

胡向阳¹,马辉²,许明¹,张文二¹

作者信息 +

Research and Development of Automatic Measuring System ofCross-section Flow Velocity in the Model for River Engineering

HU Xiang-yang¹,MA Hui²,XU Ming¹,ZHANG Wen-er¹

Author information +

文章历史 +

摘要

针对目前河工模型试验测量断面垂线流速还需要通过人工定位测量的问题,开发研制出具有全自动功能特征的断面垂线流速自动测量系统。测量系统结合二维平面自动定位测桥,自动三维地形仪等先进技术,在将断面地形的测量数据用于垂线流速测点定位的基础上,增加了断面水面边界的测量,既为流速传感器定位范围提供依据,也为后续计算提供依据,同时采用多流速传感器快速定位同步测量的方法,在实现大面积流速同步测量技术上有所突破,解决了人工测量定点速度慢、效率低的问题,适应了模型试验发展需求,提升了河工模型试验研究水平。

Abstract

In the present,in the river model test of measuring flow velocity in the vertical direction,manual positioning is needed.With respect to this situation,we developed an automatic system of velocity measurement for cross-section,combined with advanced techniques such as a 2D automatic positioning instrument for measuring bridge and a 3D automatic measuring apparatus for topography.On the basis of measured data of cross-section topography,the measurement of water surface boundary is added,which can be used for subsequent calculations and the determination of positioning range for flow velocity sensor.In this system,we also use multiple sensors for rapidly synchronous measurements.This work brings technological breakthroughs in synchronous measurements for large-scale regions,and solves problems of manual positioning measurements such as low speed,low efficiency,etc.Finally,the system can not only fulfill the developing demand for model experiments,but also improve the research for model experiments in river.

导出引用

胡向阳,马辉,许明,张文二. 河工模型断面垂线流速自动测量系统的研制[J]. raybet体育在线院报. 2015, 32(12): 139-143 https://doi.org/10.11988/ckyyb.20150548

HU Xiang-yang,MA Hui,XU Ming,ZHANG Wen-er. Research and Development of Automatic Measuring System ofCross-section Flow Velocity in the Model for River Engineering[J]. Journal of Changjiang River Scientific Research Institute. 2015, 32(12): 139-143 https://doi.org/10.11988/ckyyb.20150548

中图分类号： TV131.66

参考文献

[1] SL99—2012,河工模型试验规程[S]. 北京:中国水利水电出版社,2012(SL99—2012,Regulation for River Model Test[S]. Beijing: China Water Power Press, 2012.(in Chinese))
[2] GB50179—93,河流流量测验规范[S]. 北京:中国计划出版社,1994.(GB50179—93,Code for Liquid Flow Measurement in Open Channels[S]. Beijing: China Planning Press,1994. (in Chinese))
[3] 王兴奎,庞东明,王桂仙,等. 图像处理技术在河工模型试验流场量测中的应用[J]. 泥沙研究,1996,(4):21-26. (WANG Xing-kui, PANG Dong-ming, WANG Gui-xian, et al. Application of Image Processing Technics to Velocity Field Measurement in Physical Model[J]. Journal of Sediment Research, 1996,(4):21-26. (in Chinese))
[4] 蔡守允,谢瑞,韩世进,等. 多功能智能流速仪[J].海洋工程,2004,22(2):83-86.(CAI Shou-yun, XIE Rui, HAN Shi-jin,et al. Multi-functional Intelligent Velocity Instrument[J]. Ocean Engineering,2004,22(2):83-86. (in Chinese))
[5] 马志敏,范北林,许明,等. 河工模型三维地形测量系统的研制[J].raybet体育在线院报, 2006,23(1):47-49,60. (MA Zhi-min, FAN Bei-lin, XU Ming, et al. Development of Measuring Instrument for 3-D River Bed Model Topography[J]. Journal of Yangtze River Scientific Research Institute, 2006,23(1):47-49,60. (in Chinese))
[6] 吴新生,许明,魏国远,等. 长江防洪模型量测控制系统[C]//水利量测技术论文选集(第五集).郑州:黄河水利出版社,2006.(WU Xin-sheng,XU Ming, WEI Guo-yuan,et al. Measurement and Control System of the Yangtze River Flood Control Model[C]//Proceedings of Hydraulic Measurement(Vol.5). Zhengzhou: Yellow River Conservancy Press,2006.