水泵水轮机全特性曲线处理的研究进展

潘熙和,程远楚,王杰飞

raybet体育在线 院报 ›› 2014, Vol. 31 ›› Issue (12) : 117-123.

PDF(1064 KB)
PDF(1064 KB)
raybet体育在线 院报 ›› 2014, Vol. 31 ›› Issue (12) : 117-123. DOI: 10.3969/j.issn.1001-5485.2014.12.024
仪器设备与测试技术

水泵水轮机全特性曲线处理的研究进展

  • 潘熙和1,程远楚2,王杰飞2
作者信息 +

Research Progress of the Processing of Pump
Turbine Characteristic Curve

  • PAN Xi-he1,CHENG Yuan-chu2,WANG Jie-fei2
Author information +
文章历史 +

摘要

水泵水轮机的全特性曲线在曲线两端存在较为严重的交叉、聚集和卷曲现象,以及极不稳定的“S”型区域,为水泵水轮机过渡过程的精确仿真带来了极大的困难。针对这些现象和“S”型区域存在的问题,国内外学者进行了深入地研究,通过对全特性曲线预处理数学变换方法和拟合手段的探讨,最终得到一系列研究成果。综述了现有的全特性曲线研究成果,将研究成果按照表述方法分为二维曲线数学变换和三维曲面拟合2大类,依次对各个研究成果进行简要介绍和深入分析,指出各研究成果取得的突破和不足,提出了进一步深入研究的方向和研究的建议。

Abstract

Intersection, aggregation, intertangling and the extremely unstable S-shape area on both ends of the characteristic curve of pump turbine pose great difficulty for the accurate simulation of pump turbine’s transition process. In view of this, scholars both in China and abroad conducted in-depth researches on the mathematic transform and the fitting method for characteristic curve. In this paper we summarize the research achievements. According to the expression method we divide the research results into two-dimensional mathematical transformation and three-dimensional curved surface fitting. We also point out the breakthrough and insufficiency of the research results, and finally propose the direction and several suggestions for further research.

关键词

水泵水轮机 / 全特性曲线 / 数学变换 / 曲面拟合

Key words

pump turbine / characteristic curve / mathematical transformation / curved surface fitting

引用本文

导出引用
潘熙和,程远楚,王杰飞. 水泵水轮机全特性曲线处理的研究进展[J]. raybet体育在线 院报. 2014, 31(12): 117-123 https://doi.org/10.3969/j.issn.1001-5485.2014.12.024
PAN Xi-he,CHENG Yuan-chu,WANG Jie-fei. Research Progress of the Processing of Pump
Turbine Characteristic Curve[J]. Journal of Changjiang River Scientific Research Institute. 2014, 31(12): 117-123 https://doi.org/10.3969/j.issn.1001-5485.2014.12.024
中图分类号: TK730.2   

参考文献

[1]刘殿海. 抽水蓄能发展再认识[J]. 国家电网,2013,(9):54-58.(LIU Dian-hai. The Further Development of Pumped Storage [J]. State Grid,2013,(9):54-58. (in Chinese))
[2] 李鹏云,聂 文,陈 雯,等.抽水蓄能电站建设与岩体初始应力场综述[J].raybet体育在线 院报,2009,26(8):59-64.(LI Peng-yun, NIE Wen, CHEN Wen, et al. A Summary of Initial Rock Mass Stress Field and Construction for Pumped Storage Power Station[J]. Journal of Yangtze River Scientific Research Institute, 2009,26(8):59-64.(in Chinese))
[3] 梅祖彦. 抽水蓄能发电技术[M]. 北京:机械工业出版社,2000.(MEI Zu-yan. Technique of Pumped Storage Power Generation [M]. Beijing: China Machine Press,2000.(in Chinese))
[4] 陈德新, 谢 辉. 低比速水泵水轮机“S”特性区的内部流动[J] . 水利学报,2001,32(2):76-78. (CHEN De-xin, XIE Hui. The Flow Patterns of Low Specific Speed Pump-turbine in S-shape Characteristic Region [J]. Journal of Hydraulic Engineering, 2001, 32(2): 76-78. (in Chinese))
[5] 游光华,孔令华,刘德有. 天荒坪抽水蓄能电站水泵水轮机“S”型特性及其对策[J].水力发电学报,2006,25(6):136-139. (YOU Guang-hua, KONG Ling-hua, LIU De-you. Pump-turbine S Zone and Its Effect at Tianhuangping Pumped Storage Power Plant [J]. Journal of Hydroelectric Engineering, 2006, 25(6): 136-139. (in Chinese))
[6] 周嘉元,郑慧娟. 水泵水轮机的“S”型特性及对机组性能的影响[J].水电能源科学,2006,24(2):83-85. (ZHOU Jia-yuan, ZHENG Hui-juan. The “S” shape Characteristic of the Pump Turbine and Its Effect on the Performance of the Unit [J]. Water Resources and Power, 2006, 24(2): 83-85.(in Chinese))
[7] 端润生. 抽水蓄能电站建设及可逆式水泵水轮机的若干技术问题[J].水力发电,2012,38(12):47-50. (DUAN Run-sheng. Some Technical Problems of Reversible Pump Turbine and in the Construction of Pumped-storage Power Stations [J] . Water Power, 2012, 38(12):47-50. (in Chinese))
[8] 郑 源,张 建. 水力机组过渡过程[M].北京:北京大学出版社,2008.(ZHENG Yuan, ZHANG Jian. The Transition Process of Hydropower Unit [M]. Beijing: Peking University Press,2008. (in Chinese))
[9] 纪兴英,赖 旭.低比转速水泵水轮机“S”区特性模拟[J]. 水动力学研究与进展,2011,26(3):318-326.(JI Xing-ying, LAI Xu. Numerical Simulation of the S-shaped Characteristics of the Pump-turbine [J]. Chinese Journal of Hydrodynamics,2011,26(3):318-326. (in Chinese))
[10]张兰金,王正伟,常近时. 混流式水泵水轮机全特性曲线S型区流动特性[J].农业机械学报,2011,41(1):39-43. (ZHANG Lan-jin, WANG Zheng-wei, CHANG Jin-shi. The Flow Characteristic in S-shape Zone of Mixed-flow Pump Turbine Characteristics [J]. Transactions of the Chinese Society for Agricultural Machinery,2011,41(1):39-43. (in Chinese))
[11]肖 黎,张咏梅. 大型水轮机组瞬态动力时程响应分析[J].raybet体育在线 院报,2008,25(1):76-78. (XIAO LI, ZHANG Yong-mei. Transient Dynamic Response Analysis on Large Turbine Generator Set [J] . Journal of Yangtze River Scientific Research Institute, 2008,25(1):76-78. (in Chinese))
[12]HASMATUCHI V, ROTH S, BOTERO F, et al. High-speed Flow Visualization in a Pump-turbine under Off-design Operating Conditions[C]//Proceedings of the 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara: IDP Publishing, September 20-24, 2010. Doi:10.1088/1755-1315/12/1/012059.
[13]SUTER P. Representation of Pump Characteristics for Calculation of Water Hammer[J]. Sulzer Technical Review Research Issue, 1966, (4): 45-48.
[14]杨开林.电站与泵站中的水力瞬变及调节[M].北京:中国水利水电出版社,2000. (YANG Kai-lin. Hydraulic Transient and Regulation of Power Station and Pumping Station [M]. Beijing: China Water Power Press, 2000. (in Chinese))
[15]刘启钊, 刘德有. 抽水蓄能电站过渡过程计算中的几个问题[C]∥抽水蓄能工程国际学术讨论会论文集. 北京: 水利电力出版社, 1990: 30- 50. (LIU Qi-zhao, LIU De-you. Some Problem on Hydraulic Transient Calculation for Pumped Storage Power Station[C]∥ Proceedings of the International Symposium on Pumped Storage Development, Beijing: Water Resources and Electric Power Press,1990:30- 50.(in Chinese))
[16]陈乃祥,张扬军,祝宝山,等. 水泵水轮机全特性的新表达方式与负荷工况计算[J].清华大学学报(自然科学版),1996,36(7):62-66.(CHEN Nai-xiang, ZHANG Yang-jun, ZHU Bao-shan, et al. New Representation of the Complete Characteristics of Pump-turbine and the Calculation of Complex Operating Conditions [J]. Journal of Tsinghua University (Science and Technology), 1996, 36(7):62-66.(in Chinese))
[17]陈乃祥. 水利水电工程的水力瞬变仿真与控制[M]. 北京:中国水利水电出版社,2004. (CHEN Nai-xiang. Simulation and Control of Hydraulic Transient of Hydropower Engineering[M]. Beijing:China Water Power Press, 2004.(in Chinese))
[18]林霄汉,陈乃祥,李 辉,等. 水泵水轮机转轮特性描述新方法及其工程应用[J]. 清华大学学报(自然科学版),1999,39(4):73-75.(LIN Xiao-han, CHEN Nai-xiang, LI Hui, et al. New Method on Pump-turbine Characteristic Description and Its Engineering Applications [J]. Journal of Tsinghua University (Science and Technology), 1999,39(4):73-75.(in Chinese))
[19]张保平,陈乃祥,吴炯扬,等. 水泵水轮机全特性对数投影法的应用[J].水力发电,2009,(9):49-51. (ZHANG Bao-ping, CHEN Nai-xiang, WU Jiong-yang, et al. Application of Full Performance Logarithm-Curve Projection Method of Pump-turbine [J] . Water Power,2009,(9):49-51.(in Chinese))
[20]翁文林,杨建东. 特性曲线的分区处理与机组边界数值模拟的研究[J]. 水利水电技术,2003,34(2):54-56.(WENG Wen-lin, YANG Jian-dong. Dealing with the Characteristic Curves in Partition and the Numerical Simulation Research about Unit Boundary [J]. Water Resources and Hydropower Engineering,2003,34(2):54-56. (in Chinese))
[21]赵林明,王海燕. 逼近水力特性的一种新方法[J]. 中国农村水利水电,2006,(8):54-56.(ZHAO Lin-ming, WANG Hai-yan. A New Way to Approximate Hydraulic Machinery Characteristics [J]. China Rural Water and Hydropower,2006,(8):54-56. (in Chinese))
[22]王林锁,索丽生,刘德有. 可逆式水泵水轮机全特性曲线处理新方法[J]. 水力发电学报,2000,(3):68-74.(WANG Lin-suo, SUO Li-sheng, LIU De-you. A New Transformation Method for the Complete Characteristic Curves of Reversible Pump Turbines [J]. Journal of Hydroelectric Engineering, 2000,(3):68-74. (in Chinese))
[23]邵卫云,毛根海,刘国华. 基于曲面拟合的水泵水轮机全特性曲线的新变换[J]. 浙江大学学报(工学版),2004,38(3):385-388.(SHAO Wei-yun, MAO Gen-hai, LIU Guo-hua. New Transformation Method for Complete Characteristic Curves of Reversible Pump Turbine Based on Surface Fitting [J] . Journal of Zhejiang University (Engineering Science),2004,38(3):385-388.(in Chinese))
[24]邵卫云,张 雄. 水泵水轮机全特性曲线的拟合-移动最小二乘近似[J]. 水力发电学报,2004,23(5):102-106.(SHAO Wei-yun, ZHANG Xiong. A New Simulation Method of Complete Characteristic Curves of Reversible Pump Turbine: Moving Least Square Approximation [J]. Journal of Hydroelectric Engineering, 2004,23(5):102-106. (in Chinese))
[25]常 江,彭 彦. 混流式发电机组神经网络模型预测控制[J].raybet体育在线 院报,2007,24(1):51-53.(CHANG Jiang, PENG Yan. Neural Network Model Prediction Control for Francis Hydroturbine Generator Set[J]. Journal of Yangtze River Scientific Research Institute, 2007,24(1):51-53. (in Chinese))
[26]黄贤荣,刘德有. 利用径向基函数神经网络处理水轮机综合特性曲线[J]. 水力发电学报,2007,26(1):11-118.(HUANG Xian-rong, LIU De-you. The Treatment of Hydroturbine Synthetic Characteristic Curve by Radial Basis Networks [J]. Journal of Hydroelectric Engineering, 2007,26(1):11-118. (in Chinese))
[27]郭爱文,杨建东,鲍海燕. 基于改进BP神经网络的水力机械特性数据处理[J]. 水电能源科学,2008,26(2):136-138. (GUO Ai-wen , YANG Jian-dong, BAO Hai-yan. Data Processing of Hydraulic Machinery Characteristics Based on Improved BP Neural Network [J] . Water Resources and Power,2008,26(2):136-138. (in Chinese))
[28]黄文涛,常 黎,黄正军,等. 基于BP网络的水泵水轮机全特性空间曲面描述[J]. 水电能源科学,2013,31(12):205-209. (HUANG Wen-tao, CHANG Li, HUANG Zheng-jun, et al. Space Surface Description of Pump-turbine Characteristics Based on BP Neural Network [J]. Water Resources and Power, 2013,31(12):205-209. (in Chinese))
[29]杨桀彬,杨建东,王 超. 基于空间曲面的水泵水轮机机组数学模型及仿真[J]. 水力发电学报,2013,32(5):244-250.(YANG Jie-bin, YANG Jian-dong, WANG Chao. Mathematical Model and Simulation of Pump Turbine with Characteristic Space Curves[J]. Journal of Hydroelectric Engineering , 2013, 32(5):244-250. (in Chinese))

PDF(1064 KB)

Accesses

Citation

Detail

段落导航
相关文章

/

Baidu
map